Movie (1,4 MB) PDF documentation


Pull the hinged cover away from the fixing plate. Secure the fixing plate to the door approximately 40 cm. at the opposite side of the hinge side with the fixing plate projecting approximately 2 mm. above the top edge of the door. Secure the hook to the doorframe directly above the door check. Ensure, that the rubber roller on the door check lever, just touches the lower edge of the front lip of the hook, when the lever is in a downward position.

Use the elongated holes in both parts to obtain the correct positions. For doors with a projection +15 / +30 mm. use hook 1013. For doors with a recess 0-20 mm. use hook 1011. By fitting the door check nearer to the closing side, the closing force is increased, but the braking distance is decreased. The different cylinders are easily interchangeable.

The DICTATOR 1600 comes with a cylinder 1050, zinc finished (approx. 50N), fixing screws and a choice of hook 1009, 1011 or 1013.

If required, the following cylinders are available:

Cylinder Force


1050 50N Standard
1150 20N


1250 80N


Zinc plated cylinder finish