dimensions result in the following benefits::
- easy installation; both on
the door and the door frame;
- It does not diminish the
strength of (timber) doors. The 14-mm diameter of the housing is less
than the thickness of a lock housing, and significantly less than
The difference in dimension of the front plates is also significant;
- installation is extremely
simple for renovation purposes.
Number and location of
This is best determined in consultation with the
supplier of the door.
The HotLockingSafeCatch - HLS-catch
To be used as a catch to delay fire penetration on all 30- and 60- minute
fire-resistant doors in accordance with NEN-EN-1634-1 (or 6069:1997)
Highly user friendly thanks to the unobstructed door operation;
* For all interior doors (timber and steel doors with timber and steel
frames). Obviates the need for other types of locks (with the exception of
door position indication, due to access control).
* The number of HLS-catches to install depends on the width and height of
the door, and should be determined in consultation with the supplier of the
* Can also be used on extremely high and wide doors that cannot be tested
due to their dimensions.
A test report of the door unit with the
HLS-catch or conformity declarations is available upon request.
DICTATOR PRODUCTIE B.V. *
8304 AJ EMMELOORD
Tel. +31 (0)527-613456
Fax +31 (0)527-698420
E-mail : email@example.com
or a DICTATOR branch or representative in your
Spring force about 11 N
Stroke 23 mm
| Front plate
|Counter plate for Article No.
||Counter plate for Article No.